9 times out of 10 - your job will have a restriction of some sort such as width or height.
You need to check what restrictions you may have carefully – remember if the ground is not level where you need to get a machine through a gap, it will tilt to one side.
You need to check for underground obstructions before you dig anywhere.
It is usually best to try to get the biggest machine in that you can.
All our excavators except the 13 tonne have boom offset which will fold the boom up to 90 degrees left and 60 to the right - this reduces the slew radius in diameter. It also allows parallel digging with fences and walls.
Look for our zero tail swing machines when working next to walls - no part of the machines tail can swing into anything.
All machines are piped for hammer and accessories - do you have a floor to break out or a wall to knock down?